22 March 2011

a beret for baby...

goodness...the time does fly...

...computer problems continue on this end, but I will not let that stop me from offering the promised pattern for a baby beret!

this beret is simple, simple, simple...as easy as a cap and ever so jaunty and fun...it is also very stretchy, and will fit baby for quite a while...


these little pink hats were made with rowan pure wool 4-ply, (bought locally at  mendocino yarn shop), a super wash wool that is lovely to work with and which just happens to be the perfect yarn...in my opinion...to use for knitted baby gifts that you just know are going to end up in the washer...


a beret for baby...


you'll need:

1- skein Rowan Pure Wool 4-ply (or similar wool)
1- 12" 3.25 mm circular (optional)
1- set 3.25 mm double pointed  needles (dpn's)
1- darning needles

gauge:


6 stitches per inch over stockinette, blocked


make 1:   Insert the tip of the right hand needle into the strand (between the stitch just knit and the first stitch on the left needles) from front to back. Transfer this strand to the left hand needle. Knit into the back of this strand on the left needle and remove as usual


directions:

directions are for infant (0-3mo) and baby (3-12mo)...the bands measure about 10" and 12", unstretched, but they stretch quite a bit!


Cast on 88 (96) stitches and join in the round (careful--don't twist your work!)  Work in 2x2 rib (knit 2, purl 2) for about 1.5 inches (or more, if you like--twice that, if you wish to be able to turn it up). 



When you are finished with your ribbing, increase your stitches by another 50%, thus:
Knit 2, make 1 (see above) all the way around.  You should now have 132 (144) stitches.  Knit around and around on these stitches until your work measures about 3.5 (4.25) inches.  Now begin to shape the hat by decreasing 6 stitches, evenly, every other row:

1st decrease round:  K20 (22), K2tog to end of round--126 (138) stitches remain.
2nd (and all even rounds): Knit
3rd decrease round:  K19 (21), K2tog to end of round--120 (132) stitches remain.

Continue decreasing, in this way, until 72 stitches remain, change to dpn's if using the circular, then decrease six stitches EVERY row until three stitches remain (decreasing this quickly creates the flat top).  Knit these three stitches as i-cord for a few rounds (more if you wish to knot it).  Break yarn, pull through the stitches and through the cord to the inside of the hat.  Weave in ends and wet block, shaping the beret flat, as shown below (block on a smooth porcelain plate if you have one the right size--this creates a really nice, smooth beret).  Add flowers at the brim, if desired...

et voilà!

if you use this pattern, please consider making a contribution to save the children or any japanese earthquake relief organization of your choice...



happy knitting! 

questions?  i am glad to help...
and please let me know if you find an error! 

follow along on facebook!

31 comments:

  1. Sooo cute! and I love that Rowan Pure Wool too, I am currently knitting a sweater in it and it is lovely :)

    ReplyDelete
  2. Lovely, Pamela! I should make one for my friend's baby girl!

    ReplyDelete
  3. What an adorable, adorable pattern.

    ReplyDelete
  4. thanks everyone! nice to have the support of such talented knitters!

    ReplyDelete
  5. i know someone who will be getting this hat... thank you for the pattern!!! once more, a winner!!

    ReplyDelete
  6. Hi Pamela, I was wondering it your make1 is the same as knit in the front and back of a stitch? I am getting ready to male this beautiful had for my grand daughter, and don't quite understand, thank you Debbie

    ReplyDelete
    Replies
    1. A bit late in this thread but if you use M1F&B remember to only knit one stitch between increases. Your M1F&B has your first K1.

      Delete
    2. A bit late in this thread but if you use M1F&B remember to only knit one stitch between increases. Your M1F&B has your first K1.

      Delete
  7. Hi Debbie!

    I usually make one with a backward loop or by picking up the yarn between two stitches and knitting into the back...Is this clear? You can try knitting into the front and back if you like...

    ReplyDelete
  8. thank you so much! I understand now, Also when you wet block it are you putting it on the plate or is the plate inside?? In the Picture I don't see the plate. By the way I made mine and it is just the cutest thing ever. Thank you so much. Debbie

    ReplyDelete
  9. The plate is inside...but you don't need a plate, really!

    So glad you like the pattern...thanks for you comments!

    Pamela

    ReplyDelete
  10. When you knit the 3.5 inches after the ribbing, does that measurement include the ribbing?

    Thanks
    Monica

    ReplyDelete
  11. @Monica...
    Yes, the 3.5 inches includes the ribbing (unless you have doubled the ribbing).
    Happy knitting!

    ReplyDelete
  12. How did u make those adorable flowers??

    ReplyDelete
    Replies
    1. Hi Crystal! This post should help:
      http://pwaknits.blogspot.com/2011/05/berets-and-flowers.html
      happy knitting!

      Delete
  13. Jennifer Dryden25 January, 2013 13:55

    HI,
    In the instructions you say to "then decrease six stitches EVERY row until three stitches remain (decreasing this quickly creates the flat top)."

    How do you do this? Every 6th stitch you decrease one stitch? Or something else? I'm sorry I dont' understand what you mean. Can you please email me at jennloved@gmail.com with your answer?

    thanks
    Jennifer

    ReplyDelete
    Replies
    1. Hi Jennifer...You are decreasing 6 stitches, evenly spaced, as you have been doing all along, but you will do it EVERY row. So, at this point you have 72 stitches on your needles. You knit 10, K2tog, repeat to end of round--66 stitches remain. Next round you knit 9, K2tog, repeat to end--60 stitches remain. Continue this way until just three stitches remain.
      Hope that helps!
      Pamela

      Delete
    2. This section also stumped me. So, what you're saying is, no more knit rounds following each decrease round. Now, it makes sense to me! I am loving this pattern, and can hardly wait to finish it.

      Delete
  14. I'd like to make this for my 10 month-old granddaughter. Her head measures 17 inches. Will the larger size fit her or should I increase the stitch count by 8?

    ReplyDelete
  15. Do you have a tutorial for pressing it flat? I just finished this hat and it looks more like a bubble than a cute beret! Haha.

    ReplyDelete
    Replies
    1. Hi Michaela! Soak the beret in tepid water and wool wash. Roll in a towel to remove excess moisture, then shape it flat on another towel, with the ribbing facing up. It helps to insert a smooth porcelain plate that is the correct size, and sometimes I will use a bowl to for the ribbing. For more info, see this post: http://pwaknits.blogspot.com/2012/03/cable-baby-beret.html.

      Hope that helps!

      Pamela

      Delete
  16. I love this pattern and I've made several already but I would like to try making one for a three year old. Would switching to a DK yarn and 4mm needles work?

    ReplyDelete
  17. changing yarn and needle size will work, yes! assuming you are knitting the larger size, and are getting 5.5 stitches/ inch, your hat will measures app. 17", unstretched.

    ReplyDelete
  18. Awesome post!This little hat really is charming. I think you have a gift. I'm going to poke around a little more, here, if you don't mind. I love it when people are brave and selfless enough to share what they can do. Thank you!

    ReplyDelete
  19. I use most or all of these tips on the rare occasions I use fake eyelashes (Halloween and New Years). Those Mariah Carey lashes are fab and I love your hair, I think I need bangs!

    ReplyDelete
  20. Hello When you switch to dpns... do you use 4 or do you just put them on 1 and knit flat?

    ReplyDelete
  21. Super artykuł. Pozdrawiam serdecznie.

    ReplyDelete
  22. Jestem pod wrażeniem. Bardzo fajny wpis.

    ReplyDelete
  23. Wygląda to super. Pozdrawiam.

    ReplyDelete
  24. I loved your pattern. I made the larger size for the 3-12 month old. I thank you for posting peoples questions and your replies. It was very helpful. I would definitely make this again. . I just have to make some fowers ad I will be done. I will post it on Ravelry for anyone who wants to view. Your directions were right on

    ReplyDelete

comments are welcome!

LinkWithin

Related Posts Plugin for WordPress, Blogger...